gasket (noun): a shaped piece or ring of rubber or other material sealing the junction between two surfaces in an engine or other device.
what the dictionary doesn’t tell you: gasket (noun): havoc-wreaker.
this small piece of black rubber wields some mighty power. its failure has made us dance for the last three days (and i’m not talking about good-dancing.)
we woke to the sound of water. a pleasant sound, we were suddenly aware that we, indeed, were not camping by a lovely mountain stream. instead, we were inside our home where the sound of unsolicited running water is reason enough for stomach flips and jumping out of bed. we are good at running around looking for the problem. we are not so good at what to do next.
we stared at it. the water on the carpet in the basement was an obvious problem. we quickly traced the dripping, er, flowing stream, to the cold water feed to the shower. and, because the very wise craftsmen who built this old house had the foresight to leave a tiny door in the closet on the main floor behind this feed, we found the culprit. the coupling! one coupling, without a conscience, failing us miserably.
we were wise enough to turn the water feed off – don’t overestimate the reaction of two artists in a plumbing emergency – and the water stopped. and then the fun began.
it takes a village to play plumber. we took pictures and sent panicky texts to innumerable friends who instantly wrote back advice and words of encouragement, channeling my sweet momma’s “you can do this.” we got to work, reading and re-reading the wisdom on our phones.
inside the coupling was this tiny gasket. it was no longer completely round and smooth. its edges were a little torn and battered. here was the problem. this havoc-wreaker had done its havoc-wreaking job and we were faced with the fallout.
the shopvacs whirring, we went after the water. over and over again, until it was possible to actually move the carpet. donning masks and rubber gloves after reading up on google what we artists should do in such a plumbing emergency, we released the carpet from its metal stripping and pulled it back (wet carpet is ridiculously heavy). though we were actually helping the carpet, the padding below was sopped.
using boxcutters like pros, we, garbage-bags-later, had the padding out and were accumulating all the plastic things we could find to lay out the carpet and dry it with fans – any and all fans we had.
we read that baking soda would help so we bought boxes and boxes of baking soda and sprinkled it generously like my mom would sprinkle confectionery sugar on her homemade crumbcakes. and then it was time to wait it out.
meanwhile, we went to see tom at the hardware store. he directed us to a gasket for 99 cents that we brought home and placed in-between the pipes. it’s not quite right – the gasket we had (heaven only knows how old it is) had some shape to it – like an o-ring attached to the gasket, filling in a round moat in the pipe (note the professional terms). this gasket was flat, so we are now looking for one that has this so-called built-in o-ring to fill in the moat. without that (or some other fix we are trying to figure out) there will always be a place for a tiny bit of water to go, squeezing microdrop by microdrop under the gasket and then worming its way out the coupling and then, terrifyingly, down the pipe where – if i even see one drop on the carpet i will freak out – it could land downstairs. anyway, after days of intense and concentrated effort, the crisis has been diverted, knock wood. (there’s been a lot of wood-knocking going on…)
now, the quest for the proper gasket. plumbing supply stores watch out!
Pingback: and the gasket smiles. [d.r. thursday] | reverse threading